Putting my money where my mouth is

No, no, no…I am not referring to the “Busy bee” post. No apologies for presenting an opinion and a general critique of Irish dance dress design. Another day I will expound upon the lack of any critical review of most aspects of Irish dance. Touchy bunch, we Irish.

This post has finally percolated through my brain after experimenting with a few things in my Bernina Designer Plus, Version 5, embroidery software. I was inspired by a fellow Bernina user that I “met” in an internet group. Her name is CJ and she is the author/owner of The Wandering Quilter. I have learned much on her website. One day recently, I was exploring her blog and found this treasure about making free-standing lace. I was in awe, and I had found a new challenge…lace-making…and learning to digitize free-standing lace designs. My computer has been getting a work out.

I have stated on my blog, on the Celtic Flame ID dressmakers board, and in a couple of Yahoo groups (IDD, BerninaArtista, etc) that I:
#1 – Love this software in general
&
#2 – Hate parts of it specifically. I dislike the parts that are supposed to make life as a digitizer easier such as the auto-digitizer, magic wand and auto-split functions. I find them not intuitive and usually useless.

So, the past couple of days I have taught myself to digitize lace. Fun, fun. This morning I asked Susan (my Feisdress partner) to give me something that I could turn into lace. I love what we have done, but I have decided that this particular design would be better suited to being stitched onto fabric or net. When I applied the principles of digitizing free-standing lace to this design, too much of what I did changed the basic look, so it evolved into an exercise in using two of the functions I dislike: auto-digitizer and the magic wand.

Let me say here, that I fully understand how the auto-digitizer and magic wand functions work. They must work very well for most folks or they would not exist. I usually try them when first digitizing a new design, but I always erase it and do it myself. I have documented my attempts at using them today…and I learned a few things. I took pics as I went along.

This is a section of the whole design Susan sent me. It is the approximate length of the mega-hoop. Pretty, isn’t it? (Please do not copy this design as it belongs to Susan.)
Photo Sharing and Video Hosting at Photobucket

This is the basic unit in a jpg format.
Photo Sharing and Video Hosting at Photobucket

And this is the result of the auto-digitizer. Yuck.  This rather bizarre organization is one of the dead give-aways that a digitizer chose the “easy” way.
Photo Sharing and Video Hosting at Photobucket
Now I realize it is a computer program and it reads the lines as they are…I expect to clean up the clarity of edges. But what is happening at the line junctions is unacceptable. Susan has sent me designs in an emf format in the past. We did some research and thought this might help the software better read the sequence of lines, but we have not had any better success.

Here is the magic wand at work. Double yuck.
Photo Sharing and Video Hosting at Photobucket

Here I changed the angle of the satin stitch that the magic wand generated, but in a design like this, there is always going to be a section that is wrong.
Photo Sharing and Video Hosting at Photobucket

So, before I scrapped the whole thing, I changed the original jpg. Using Paint, I separated the design at the appropriate junctures.

Photo Sharing and Video Hosting at Photobucket

Then, I tried auto-digitizer again and got this. Better, but still not right.
Photo Sharing and Video Hosting at Photobucket

So, I ungrouped the design and deleted the part that did not work.
Photo Sharing and Video Hosting at Photobucket

I fixed all the curliques. The area of each junction needed fixing mostly because my jpg edit was not as careful as it could have been, but also because I wanted them to overlap, not simply butt up against one another.
Photo Sharing and Video Hosting at Photobucket

Then I digitized the big curl myself, and voila!
Photo Sharing and Video Hosting at Photobucket

I did this whole thing below here myself before I did my experiments above.
Photo Sharing and Video Hosting at Photobucket

Photo Sharing and Video Hosting at Photobucket

Now that I have explored further and found a way to use the auto-digitizer, I could use it in the future. It is a tool I could use for parts, not the whole thing.  However, it is not a quick solution.  In fact, it might even be more inefficient because I have to re-check everything and make adjustments.

So have I changed an opinion? Yes…sort of.   Auto-digitizer can be used and manipulated. Magic wand? No, still not magic for me.

Thanks for the inspiration, CJ!

3 Comments (+add yours?)

  1. Gina
    Jun 22, 2007 @ 21:20:00

    I really love the final outcome .. maybe I better get my brother serviced and ready to do programmed embroidery … I have a feeling …..

    Great JOb

  2. the wandering quilter
    Jun 23, 2007 @ 05:38:00

    Oh wow that’s amazing, I can’t wait to see how you use the design. Your dresses are works of art!

    How do you like the pleater? Isn’t that the most awesome piece of equipment? I’d love one of those myself!

  3. picperfic
    Jun 23, 2007 @ 06:08:00

    oooh…I love that..not so sure of the colour ind you. Wouldn’t it look good as an overlay, or would it look as though it had been emboidered on? I so need to do a swap with you, I want to touch some of your work, it looks very tactile! Does that sound wierd? Hmm…I think I’d like to incorporate this lacey stuff into a handbag or something. Do you use water soluble stuff to sew onto or does your machine trim as you go?

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: